编程单个SB8F
在对传感器盒进行编程之前，节能真空泵，请确保有线输入处于所需配置（开/关）以启用输出。按下AUTOSET按钮并按住3秒钟，直到READING红灯开始闪烁，然后松开。红灯（READING）闪烁表示微处理器正在读取和存储全部输入的状态。然后红灯熄灭，启用了输出。黄灯（STORED）指示启用输出。
Before programming the sensor box， make sure that the wired inputs are in the confguration (ON/OFF) desired to enable the output. Press the AUTOSET button and hold it down for 3 seconds until the READING red light starts fashing，真空泵排名， then release it.The red light (READING) fashing indicates that the microprocessor is reading and storing the state of all the inputs. Then the red light goes off and the output is enabled. Output enabling is indicated by the yellow light (STORED).
带有 3 个颚式钳的自动定心气动抓持器（TH 系列）
?双动作，带可选弹簧（一般关闭或者一般开启） (3)。
?长行程或者短行程(1)。
?可通过螺丝紧固在前面(2)。
?高i效率的传动装置(1)。
?可选的类磁感传感器。
?FDA-H1 食品级润滑脂.
?Double acting with optional springs (normally closed or normally open) (3).
?Long stroke or short stroke (1).
?Possibility of front fastening with through screws (2).
?High efffciency force transmission (1).
?Optional magnetic or inductive sensors.
?FDA-H1 food-grade grease.
Gimatic拥有五大系列、3000多种产品，生产真空泵厂家，分别涉及气动、电动、真空和传感器等，临汾真空泵，拥有180多项授权，独有的设计可满足客户各种不同的需求。
3-jaw self-centring electric gripper
? Plug & p1ay user friendly gripper.
? No electricity con5umption when gripper is engaged.
? No programming required.
? Gripper retention guaranteed in event of blackout.
? Self Adapting jaws part.
? Long life Brushless motor (Brushless DC).
? Built-in motor driver.
? 24 Vdc Low Voltage Power Supply.
? M8x1， 3 poles standard connection.
? Controllable by PLC as a pneumatic valve.
? Fiber-carbon gear reduction.
? 10 milion cycle maintenance-free.
? T-slot style jaws for heavy loads.
? Weight-dimensi0n5-force best trade off.
? Rotary actuator fitting compatible.
? Optional magnetic sensors.
临汾真空泵-生产真空泵厂家-吉玛泰克(推荐商家)由吉玛泰克自动化工程（常熟）有限公司提供。吉玛泰克自动化工程（常熟）有限公司为客户提供“机械手前端治具，真空系列，传感器，机电一体化组件”等业务，公司拥有“吉玛泰克自动化工程”等品牌，专注于气动工具等行业。，在江苏省常熟市古里镇通华路1号2幢的名声不错。欢迎来电垂询，联系人：吴琦。