舟山机器人抓手-智能机器人抓手-吉玛泰克(推荐商家)

传感器

磁性传感器(可选) 通过活塞上的一个磁铁检测出操作位置。因此，大量的磁性材料和强烈的磁场可能会造成传感问题。

The operating position is detected by proximity magnetic sensors

(optional) through a magnet p1aced on the piston.

Therefore， avoid using the gripper in the vicinity of intense

magnetic ffelds or near a large mass of ferromagnetic material

as this may cause detection errors.

夹具订制

AGG可在机械手和模具间提供精i准的中心。

注塑模具内金属嵌件安放时尤其要注意这一点。

夹具AGG...B 安装在EOAT上，钢管 AGG...C 安装在模具上。

一旦机械手向模具靠近，夹具在压力的作用下逐步向钢管靠近，

并与之接触。

AGG21-B 和 AGG30-B 采用的是双动作安全弹簧，机器人抓手公司，确保在压缩空

气 (NC)缺失时设备的正常运行。

AGG19-B 采用的是单动作复位弹簧(NO)。

Gripper for engagement

The AGG is used to provide a precise centering between the robot

and the mould.

This necessary when metal inserts must be p1aced in the

mould，舟山机器人抓手， before the p1astic injection.

The gripper AGG…-B is fitted on the EOAT， while the steel bushing

AGG…-C is fitted on the mould.

Once the robot has approached the mould，智能机器人抓手， the gripper is

pressurized，机器人电动抓手， thus it closes and engages the bushing.

AGG21-B and AGG30-B are double-acting with a safety spring to

keep the gripper engaged even without compressed air (NC).

AGG19-B is single-acting with reset spring (NO).

双钳口自动校准平行i气动夹具(SGP-S系列)

?双动作。

?反冲调整系统。

?小尺寸高i性能。

?紧固的构造使其非常适合重型作业的运用，使用寿命长，免维护。

?不同的紧固和输送选项。

?随时用于 PRO-SN…HS (1) 可编程磁性传感器。

?食物级润滑油FDA-H1。

Double acting.? Backlash adjusting system.? High performance in small dimensions.? The rugged construction lends itself to heavy duty applicationsfor a trouble free long life without maintenance.

Various fastening and air feeding options.? Ready for PRO-SN …HS (1) programmable magnetic sensor.? Food grade grease FDA-H1.